Owens Corning Blown In Insulation Nationwide

Owens Corning Blown In Insulation in Austin: What to Know First

Owens Corning blown in insulation in Austin typically costs between $1,800 and $4,200 for a standard 1,500-square-foot attic, depending on existing depth, access, and whether air sealing is needed. Most jobs are completed in one day, and we provide a written price before any work starts. If your Owens Corning fiberglass has settled, gotten matted down by rodents, or was installed thin years ago, this page tells you exactly what happens next. Call (325) 246-2929 and a live person answers, 24/7.

Call (325) 246-2929

This page is for Austin homeowners who already have Owens Corning insulation in their attic, or who are considering it for a re-insulation job, and want to know what it actually takes to get the R-value back where it belongs. Not every insulation company in Austin will tell you the truth about how Owens Corning products age in our heat. We will.

Key Takeaways

• Owens Corning blown in insulation (loose fibers blown into the attic cavity to fill every gap) settles over time in Austin’s heat, sometimes losing 20 to 30% of its original R-value
• We provide independent Owens Corning service in Austin: we install it, top it off, and fix what failed, but we are not a manufacturer-authorized dealer
• Every job gets a written price before work begins, covered by our 365-Day Done Right Promise
• Your technician’s name and photo arrive before the visit so you know exactly who is at your door

How Owens Corning Products Fail in Austin, and How We Fix Them

Austin attics reach 140°F and hotter in July. Owens Corning blown in fiberglass handles that heat fine on its own. The problem is almost always what happens to it over years of exposure to attic moisture, roof leaks, pests, and careless access from AC techs and electricians. Here are the failure modes we see most often in Austin homes:

• Settling and R-value loss: Owens Corning AttiCat blown in fiberglass, the most common loose-fill product in Austin attics, is designed to resist settling. But it still compresses over years, especially under roof traffic and storage. We regularly see attics that were blown to R-30 in the early 2000s now testing closer to R-19. The fix is a verified depth top-off, not a guess. We measure with a depth gauge, calculate the existing R-value, and blow additional AttiCat or a compatible loose-fill fiberglass to get where you need to be.
• Rodent damage and contamination: Rats and squirrels love blown in fiberglass. They tunnel through it, nest in it, and leave droppings that contaminate the material. If we find that in your Austin attic, and we do on a regular basis in older neighborhoods like Crestview and Brentwood, the fix starts with removal and sanitation before any new insulation goes in. Blowing fresh Owens Corning over contaminated material doesn’t fix the problem; it hides it.
• Compression from roof work and ductwork: Fiberglass insulation only works when it holds air. Once it’s compressed by someone crawling through the attic or setting plywood across the joists, its R-value drops fast. We see this constantly in attics with AC air handlers or ductwork installed after the original insulation. Six inches of compressed AttiCat performs like three inches. Our fix is fluffing where possible, removing and replacing where not, and setting proper walk paths so the next person through the attic doesn’t wreck it again.
• Uneven installation from the original build: Not every Austin home got the insulation it was supposed to. Some builders blew Owens Corning thin over the center of the attic and skimped at the eaves, around bathroom fans, and over garage ceilings. The homeowner’s energy bill pays for that shortcut every August. We find the shallow spots with a thermal check, mark them, and bring the whole attic to a consistent depth.
• Air leaks under the insulation: Fiberglass, including Owens Corning blown in, does not stop air movement. If the attic floor was never air sealed at penetrations, recessed lights, top plates, and chimney chases, the insulation filters the air instead of stopping it. In Austin, that means hot attic air gets pulled into the house every time the AC runs. Our standard Owens Corning blown in job in Austin includes air sealing on the specific penetrations we find. Without it, you’re paying to insulate an attic that leaks like a screen door.

Our Owens Corning Blown In Insulation Process

This is what a typical Owens Corning blown in insulation job in Austin looks like from the first call to the final walkthrough:

1. 1
   You call (325) 246-2929. A live person answers, asks a few pointed questions about your attic, your energy bills, and the age of the home. No voicemail tag, no call-back window.
2. 2
   We schedule the visit and send your tech’s name and photo. Before anyone steps on your property, you know exactly who is showing up: name, face, ID badge, marked uniform. The Threshold Standard, on every job, no exceptions. If anyone else arrives, the visit is free.
3. 3
   Your tech inspects the attic and tests what’s there. We check existing depth, material type, ventilation, air leaks, and pest activity. If you already have Owens Corning blown in, we’ll tell you honestly whether it needs a top-off or a full removal.
4. 4
   You get a written price before any work starts. The quote covers materials, labor, air sealing if it’s needed, and cleanup. No post-job surprises. You sign it before we touch the attic, or you don’t.
5. 5
   We do the work, usually in a single day. That means protecting the access point, removing old material if the job calls for it, air sealing, blowing Owens Corning loose-fill to the specified R-value, and verifying depth with a gauge, not a guess.
6. 6
   We show you the depth before we leave. Then we hand you the written 365-Day Done Right Promise. If anything fails within a year, we come back and make it right at no charge. That covers labor and materials, in writing.

What Owens Corning Blown In Insulation Costs in Austin

These are the price ranges we see across Austin for Owens Corning blown in work. Actual numbers depend on attic size, access, existing material, and whether we’re air sealing.

What moves the price: attic access (pull-down stairs versus a scuttle hole), how much old material needs to come out, whether there is rodent contamination, and how many penetrations need air sealing. We give you the written number before any work starts, and that’s the number you pay. Call (325) 246-2929 for a free estimate.

Why Austin Homeowners Call Aspen Attic Insulation Austin for Owens Corning Work

Plenty of Austin insulation companies will blow fiberglass into an attic. Fewer will stand behind it for a full year, in writing, covering labor and materials. That’s the 365-Day Done Right Promise, and it’s not a marketing line. It’s a contract we hand you at the end of the job. If the insulation fails within a year, we return and fix it at no charge. No argument, no re-quote.

We also show up the way we said we would. Every technician is background-checked and identity-verified. You get the name and photo before the visit. If anyone other than that person arrives at your door, the visit is free and Aspen makes it right. For Austin homeowners who are often home alone, or who have young kids, that is the difference between calling a contractor and worrying about it for a week.

We stock Owens Corning blown in insulation alongside seven other premium brands: Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, GreenFiber, and Reflectix for radiant barrier work. That means we put the right product in your attic, not the one sitting in the warehouse. Garrett Sloane and his crew know Owens Corning loose-fill inside and out, because they see it in Austin attics every week.

FAQs